Get ready to improve your life and start enjoying life more by replacing the headphone pad. Learn how to replace earpads on Sony headphones plus useful tips for proper care.
It is always a pleasure to use high-quality headphones with comfortable ear cushions, which is why using headphones with worn-out or deformed ear pads is so frustrating.
It wouldn’t take much effort to get new headphone pads installed. It’s one of the easiest tasks to do. So, go ahead and replace those horrible headphone pads.
Whether you’re an audiophile with a high-end pair of Sony headphones or just a casual listener with a pair of budget Sony earbuds, at some point you’re going to have to replace the earpads. In this article, we’ll show you how to replace earpads on Sony headphones!
Table of Contents
How to replace earpads on Sony headphones?
If your Sony headphones need a replacement earpad, don’t fret! It’s a relatively easy process that anyone can do at home. All you’ll need is a new set of earpads, a Phillips head screwdriver, and a few minutes. Follow the steps below and you’ll have your headphones good as new in no time. Also read How to clean Sennheiser Ear Pads.
Prepare your tools
Before you do anything else, take the time to prep your tools. You’ll need everything you need for the replacement of your headphone pads to complete this project.
1. Replacement Pads
The first thing that you’ll need is a new pair of replacement headphone pads. You’ll first need to look for replacement headphone pads that fit your specific headphone model.
2. Earpad Tape
Ear pad tapes are good for securing your replacement pads. They usually come with their pair of replacement pads, but if they don’t, you can also buy your own.
3. Prying Tool
The prying tool could be anything you can use to pry or remove the headphone pads. You can buy a professional prying tool at most technology stores, or if you have the money you could always use a plastic card, a dull butter knife, or even your fingers to do the job.
The key to any headphones is that they can be put in place between the two headphones pads, keeping them apart without hurting them.
4. Old Toothbrush
You’ll need an old toothbrush or other similar brush to remove the dust and old glue/tape residue that remain after removing the headphone pads.
Install Replacement Headphone Pads
When installing your new headphones, it’s important to go easy and take your time to ensure that the pads fit perfectly.
For Easily Removable Pads
Position the cloth/material of the new pad against one side of the headset, with the plastic lip or groove of the headset
Once you have a portion of the cloth securely in place inside the ear, continue to use your fingers to slide the rest of the cloth down the groove and finish by sliding it completely over the ear.
To create a snug fit, slightly rotate the ear pad to secure the entire ring of fabric in place.
For Glued Headphone Pads
Apply the Earpad Tape to each headphone pad. Ensure the tape is properly positioned by comparing the holes in the tape with the holes on the pad’s frame.
Applying earpad tape to a headphone pad can be tricky if you don’t know how to do it properly. You can remove the paper cover from the backside of the tape once the tape has been properly applied to the pad.
It is very important to align the earbuds properly before attaching them to the headset. Make sure that the seam of the pads is facing down towards the charging port. Attach the headphone pad to the headset and hold it in place for a couple of seconds or until securely installed.
When to Replace Headphone Pads?
We replace our headphone pads at least once every two years. Our headphone pads are worn out due to the high frequency of use. It is noticeable only when it becomes irritating while wearing the headphones and negatively impacts the overall sound quality.
It’s never the wrong time to change your headphone pads. Just check out this list of the more common reasons why you should do it.
Rough Feel and Cracking
If your headphone pads feel rough when you put them on, and they’re showing any signs of cracking or crumbling, then it’s time to switch them out.
Rot and Smell
It’s not unusual for the foam headphone pads to get moist, and this is because of their porous nature. It’s perfectly normal for the pads to absorb sweat, oils, and dirt over time. If you want to clean the earphones, you should clean the pads once a week.
If you feel that your headphone pads are not as comfortable or bouncy as they once were, then it may be time for you to replace them. When headphones pads become flattened, they lose their springy bounce, which can be quite irritating to wear.
Tips and Tricks
If your Sony headphones are starting to show their age, one way to make them feel new again is to replace the earpads. This is a relatively easy process that anyone can do at home, and it can make a big difference in the comfort and sound quality of your headphones. Here’s a quick guide on how to replace the earpads on Sony headphones.
First, you’ll need to purchase replacement earpads. You can find these online or at many electronics stores. Be sure to get the right size and type of earpad for your particular model of Sony headphones.
Once you have the replacement earpads, start by removing the old ones. On most models, there will be a small screw or piece of plastic holding the earpad in place. Remove this and then gently peel the old earpad away from the headphone cup.
With the old earpad removed, take a look at the inside of the headphone cup. You may see some dirt or debris Buildup here. If so, use a soft cloth or brush to clean it out. Once the headphone cup is clean, place the new earpad over it and secure it in place with the screw or piece of plastic you removed earlier.
With these tips, you should now be able to replace the earpads on your Sony headphones with ease. Doing this will not only prolong the life of your headphones but also improve their sound quality. It will save you money in the long run as you won’t have to buy new headphones as often. Feel free to leave any questions or comments below.
Ethan Hawks is a 23-year-old Blogger from Switzerland. He loves to write reviews about tech products. He is a part-time gamer as well. He helps people in getting insights about different products. He has done BS in Computer Sciences as well.
Affiliate Disclosure: I may earn a commission for my endorsement, recommendation, testimonial, and/or link to any products or services from the links above. Your purchase helps support my work in bringing you real information about my experience, and does not cost anything additional to you.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.