How to keep Headset Wires from Twisting

If you’re wearing a headset in the office, you know how important it is to prevent your headphone wires from getting twisted. The best way to do this is to place your computer or desk next to a wall. That way, the wire won’t be able to twist and you won’t have to deal with any headset tangles.

Many users are familiar with the problem of twisted headset wires while wearing the headset. This article provides a few tips to avoid the problem.

How to keep Headset Wires from Twisting

Why do Wires start to Twist?

Headphone wires often curl or twist because they’re constantly being moved around. When you have to set down your headphones, it’s normal to move them around, then pick them up again. This can cause the headphone wires to get tangled up.

When the angle reaches 360°, the wires will twist around each other, and that will create a sound that’s hard to ignore.

The twisting effect caused by the repeated turning of the device can be a cause of concern, but it isn’t immediately apparent. If you notice the wires becoming twisted, you can try to fix the problem by stopping the machine, unplugging the power cord, and allowing the wires to straighten out.

You can’t just throw your headphones into a drawer and expect them to be ready for the next time you use them. They’ll quickly get tangled and twisted, and then you’ll have a mess of wires.

How to keep headset wires from twisting – Tips

Your headphones cables can get tangled up, especially if you have many different pairs that need to be stored away when you’re not using them. You can save yourself a lot of trouble by storing your headphones neatly and safely.

This article is about how to stop your headphones from getting tangled or twisted.

Headphones are a great tool for enjoying music. They are easily carried around, used while walking or exercising, and they are very portable. However, headphones need to be stored in a way that prevents their wires from getting twisted, kinked, and bent.

You can’t go from a straight line to a curve without making a slight adjustment to the shape of the curve.

Over time, as a result of the constant twisting and tension build-up due to the kinks, the thin plastic wire shielding may get damaged and torn, eventually exposing the copper wires inside. If left unprotected, the copper wires can develop micro-fractures that can affect sound quality and make the headphone defective.

If you want to keep your headphone and earphone wires from tangling, twisting, or getting tangled, then it’s possible to do so. Here are a couple of ways to do so.

1. Store your headphones in a case or a carry bag

When you store your headphones in a large storage bag, they don’t stay put securely in place, and the headphone wires get twisted or tangled throughout the day. This can also negatively affect the overall life of your headphones.

If you want to use your headphones for long periods, you should not store them in your pockets. Otherwise, you might damage the wires.

If you’re not using a dedicated headphone case, it’s best to use a carry bag that contains pockets designed to secure your headphones in place. The carry bag is best because it protects the headphone from external damage and prevents the twisting of the cables.

It’s a good idea to store your earphones inside a headphone carry bag. That will protect your earphones from tangling and keep the wires from getting damaged.

2. Follow the ‘over-under’ cable coiling method

No matter how experienced you are with using your headphones, it’s always better to follow the coil of the wire rather than coil the wire around the headphone. The coil of the cable will leave a less noticeable twist in the wire.

Cable management is a very important aspect of any project. However, if you follow the ‘over-under’ method of cable coiling, you’ll find it easier to do so.

Hold the cable in your left hand and make sure it’s facing towards you.

Make the first coil by sliding your hand down the cable.

Place your hand on your chest, and make sure your thumb is pointing down. Then, grab the cable and create the second coil by bringing the cable back up into your left hand.

The regular and twisted coils should stay the same size. When you pull it out, the regular and twisted coils cancel each other out.

3. Follow the ‘8’ cable coiling method

Put the earbuds in your ears and hold them there between your thumb and three of your fingers.

Wrap the wire around your three fingers so that you have about three to five inches of wire.

After that, take the two fingers out of the wrapped portion, but keep the index finger in the wrapped portion to make it easier to hold.

Now that you’ve finished wrapping the wire around the rope, loop the remaining portion of the wire around the wrapped section and tuck the end of the cord into the wrapped portion to secure it tightly.

4. Follow the double fold and knot method

Double the entire length of the headphone and then cut the extra off.

Stretch the headphones out, and then fold them back up again.

Pull one end over and under the other end to create a simple loop.

5. Use a rubber band

Follow the steps above for one of the headphone folding or coiling methods.

If you want to ensure that your headphones stay put, loop a rubber band around them.

6. Put your headphones around a long object like a pencil

Find something long that you can keep in your office that is easy to reach. This could be a pencil, candle holder, or even a hairbrush. Anything you can keep at your desk that is easy to reach.

Next, wrap the headphone cord around the long object to keep it from getting tangled when it’s not in use.

Use a pair of needle-nose pliers to twist the end of the headphone jack into the final loop on the wire, making sure it’s securely held in place.

7. Use velcro or self-adhesive fabric tape

Fold the headphones by rolling them up or by wrapping them around the neck.

Secure the headphone with a small strip of fabric tape or velcro straps.

8. Wrap your headphones around your phone

This quick tip will help ensure that your headphones don’t unravel when you don’t have the chance to wrap them around your phone. Simply wrap the end of the headphone wire around the final loop to keep it from getting unwrapped.

9. Fold your headphones with a binder clip

The headphone jack is inserted into the binder clip. Stop once you reach the end of the headphone drivers.

After you wrap the headphone wire around the binder, the wire should not touch the sides of the binder.

Clip-on headphones are convenient when traveling, but they don’t always fit comfortably. You can use the binder clip to adjust the length of the headphone by using it as a clip.

10. Make a headphone holder from an old credit card

You’ll need sturdy cardboard or any old card that will fit your phone or tablet.

Now, cut two pieces of paper to make two cuts in them. Cut one piece of paper into two equal parts and then cut the other piece of paper into two equal parts.

The holes are cut for the headphone jack and speakers.

Once you’ve got the speaker wires wrapped around the card, it’s time to insert the card into the card reader. Make sure that you tuck the headphone jack into the last hole at the end.

11. Make your headphone cord tangle-free with a Paracord

If you’re a music enthusiast, it’s time to upgrade your headphones. While you may have heard that it’s better to buy a new pair of headphones every year, that isn’t necessarily true. Here’s how to get the best sound quality from your headphones.

If you have a USB cable, you can use it to connect your phone to the computer. But you can also use a standard headphone cable, which will allow you to listen to music and talk on the phone simultaneously.

In this case, you would be left with the microphone, the cable that you plugged into the computer, and the cable that you plugged into the sound card.

Pull out the loose thread from the inner side of the paracord and cut it into three sections. Measure the length of each section and pull out the loose thread from inside the paracord.

After the headphones are complete, insert the wires into the paracord shells, and then shrink the ends with a lighter. Alternatively, you may use strong tape.

The next step is to connect the individual wires of the headphones. Make sure to follow the color codes of the wires to attach them correctly. Remove the plastic coating before applying the electrical tape.

If you don’t have a headphone jack on your phone, don’t buy it.

The headphones should be plugged into the amplifier. Then, the amplifier should be turned on and the speakers should be attached to the amp. Finally, hot glue should be applied to the speaker cords and the cord should be inserted into the amplifier.

Make your headphone cord tangle-free with a Paracord

How to Prevent Wires From Twisting

There are many ways to stop headphone wires from curling. They include the following:

Be careful how you use and store your headphones

If you’re like most people, headphones get twisted up over the day, but sometimes, just twisting them 180° each time you pick them up is enough to make your wires untwist themselves.

If you want to avoid dropping your headphones, simply being extra careful about how you store and handle your headphones is a good first step. Having a headphone stand or hook encourages you to keep your headphones in the same position every time you put them on or take them off.

Storing them correctly

Your headphones are made of delicate materials that need to be stored carefully. It’s best to keep your headphones in a dedicated case or carry bag when you aren’t using them.

Headphones cases and carry bags are designed to keep your device safe when you’re on the go. They keep your wires neatly tucked away, preventing them from getting tangled, tugged, or folded if you just stuff them in your bag.

To wrap the cables, use the ‘over-under’ method

If you’re like most people, you’ve probably twisted your wires together with your hands while wrapping them around your body, which makes it difficult to get the cables out later on. So instead, here are some tips for wrapping your cables properly.

You don’t need to wind each coil individually; you can wind a whole bunch of coils at once.

In the over-under method, the performer sits on top of a box, holding two sticks that are connected at the ends by a rope. The box is placed on a table that is covered with a sheet of black paper. The box serves as the base for the props used in the performance, while the table acts as a ‘stage’ and provides a flat surface for the performers to stand on.

To start, slip the end of the wire through one of your fingers and wrap it around that finger as if you were making a loop. Then slide your finger a little way down the wire and make the first coil.

Twist the wire as you bring it up to coil it. When you’re bringing the wire up to coil it, twist your palm inwards.

Wrap the wire around the frame.

There’s indeed no tension building up in the wire when it comes time to unwrap it, but the over-under method still works very well. All of the coils are counteracted by the loops you make with your twisted palm, so there’s no tension building up in the wire. There is no twist when it comes to unwrapping it.

How to Straighten Out Your Headphone Wires?

This is so simple. You’ll only need a regular-sized paper clip. You want to first unplug your headphones and put them down somewhere safe. Now, remove all of your headphone wires from the case, and hold the two ends together with your paper clip. Then, squeeze and twist both of your headphones wires together until you hear a “click.” That is how you have successfully straightened out your headphones.

How to Straighten Out Your Headphone Wires?
How to Straighten Out Your Headphone Wires?

Why Do Headphone Wires Start to Twirl?

Because of humidity, dust, and moisture, headphone wires tend to become tangled. If your wire starts to get tangled, separate it from its mate and then give them a thorough dry clean to avoid more damage. If that doesn’t work, you can use an old pencil eraser to tease apart the cables. After removing the eraser, make sure to re-dry everything with a hairdryer or heat from an iron.


You can avoid that annoying feeling of twisting your headphones wires when you put your headphones on by remembering to keep your headphones straight. Next time you put your headphones on, just be aware of how the slightest change in orientation can cause the wire to twist, and try to avoid it.

If you have a great tip for keeping headphone wires tangle-free, we’d love to hear about it in the comments. Don’t hesitate to share it with us!

Also Read: How to fix Wet headphones

Frequently Asked Questions (FAQs)

Why do drummers wear headphones and other devices?

Headphones are to keep you safe from the noisy environment, protect your ears from hearing damage, and make you more comfortable listening. Drummers wear headphones for a few reasons. The first is to block out all the noise of a practice or performance space. This makes it much easier to concentrate on what’s happening on the stage, in the band, or in the recording studio. It also helps prevent your eardrums from being damaged.

How To Make A Paracord?

Start with 3 strands of 550 paracords. These strands should be 8 inches each. They can also be purchased at your local hardware store. You’ll need an ordinary wire cutter to cut the strand into three pieces, and a pencil to measure the amount.

How to keep earphones wire straight?

If you notice that the cord on your headphones is curled up when you put them in your ears, you can flatten the curl with a paperclip or a straight pin. Just pinch the headphone cord between your fingers and bend it out of shape, then place the straightened part in between your pointer and middle fingers of one hand and your index and little finger of the other hand. Hold the straightened piece of the headphone cord and gently push and pull the ends together and apart. The more you repeat this process, the straighter the cord gets.

Why Do Your AirPods Keep Disconnecting?

It is possible for your earbuds to accidentally disconnect when in use or while being packed away in a pocket or bag. Follow these steps to resolve the issue:

Make sure to remove all clothing, jewelry, or other accessories that could snag or damage your headphones before taking them off.

Use a gentle tug on the cord to make sure it’s not tangled.

Place your headphones down flat so the case or cover does not block your headphone’s audio signal.

How to Fix buzzing noise in headphones?

First, let’s check if you are experiencing this problem with all of your headphones. If you notice any buzzing noises or crackling sounds with just a single pair, you might want to replace them or at least use a different connection. If you are still experiencing the problem, you should try connecting the wires to the same port on your computer or phone (or both) instead of using a separate cable.

Affiliate Disclosure: I may earn a commission for my endorsement, recommendation, testimonial, and/or link to any products or services from the links above. Your purchase helps support my work in bringing you real information about my experience, and does not cost anything additional to you.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.