How To Connect Powered Speaker To Mixer? 9 Best Ways in 2022

Sometimes there are situations where you need to know how to connect powered speaker to mixer. As an example, two speakers are not enough for a DJ at a wedding reception hall to cover more area and many other similar situations.

Connecting powered speakers to a mixer or DJ controller works best when the speakers are connected to the main outputs of the mixer. This way you can chain them up and daisy chain the others. 

There are two easy ways to do this, but you’ll need to add a little bit more work to one of them. You can connect speakers to the Main OUT channel, and then connect speakers to the SUB OUT channel, also called GROUP OUT.

This post explains how to connect four powered speakers to a mixer using the daisy chain option. We’ll explore each of the different scenarios in more detail.

How to Connect Powered Speaker to Mixer

To get powered speakers to your mixer, read these instructions carefully:

1. Know your mixer’s connection.

Your mixer should have at least one unbalanced line. An unbalanced line is good for rejecting noise. Two types of connections are balanced and unbalanced lines. A balanced line can reject induced noise.

A TRS or XLR jack is ideal for a long cable run. These connectors are used for transmitting an audio signal from a balanced device to another. Balanced lines are much less susceptible to noise and interference than unbalanced lines.

Unbalanced lines – more susceptible to induced noise problems. Unbalanced connections should be kept short to reduce noise and interference.

2. Position your equipment.

It’s important to properly position your equipment before you use it. Here are a few things you should know: First, place the powered speaker in front of the audience.

Check that the speaker is placed in front of all the microphones. This will avoid interference. Put the mixer at the back of the powered speaker. Don’t let the two components touch each other.

3. Check your equipment.

To check if your mixer and speakers are working properly, check them first. Start with your mixer. Make sure all the channel buttons – EQ, Master Volume, etc. are down. Then turn on the power button.

Make sure the volume buttons work and that the power button works. If either of them does not work properly, then turn the device off, and follow the same procedure when testing the powered speakers.

4. Layout the speaker cable.

Lay the speaker cables out on the table. Speaker cables connect the speakers to other sources. If possible, keep the cables short to avoid interference. Ensure that the excess cable is coiled at the bottom of the speaker stand to prevent accidents.

5. Connect the speaker to the mixer.

Connect the speaker to the mixer before you connect it to the amplifier. Make sure both are turned off. Then connect them, and turn on the speaker and the mixer.

6. Connect the source components to the mixer.

You’ll learn what source components are and how to connect them to the mixer. These components form the foundation of your audio system. You’ll learn what components are most important for your setup and how to connect them to your mixer.

Connecting a source component to the mixer is as simple as following these steps: Plug one end of the cable into the headphone jack of your device.

The other end of the cable should be connected to the “Line-In” port of the mixer. Now play any music on your device and the mixer should start playing the same music.

7. Adjust the channel buttons to their lowest setting.

Put the Mixer’s Gain, Fader, and Master Volume buttons to the lowest levels. This will reduce any possible noise and avoid unwanted interference.

8. Check and adjust the sound output.

You must check and adjust the sound output. Use the equalizer controls to adjust the volume, treble, and bass. Most mixers have a separate equalizer for each channel. An equalizer can affect the whole mix on some mixers.

9. Turn off the mixer and the speaker.

Turn off the mixer and the speaker first – then turn off the mixer. Put all the buttons at minimum levels. Compared to other types of speakers, powered speakers are more convenient to use.

Music lovers don’t need amplifiers to make the volume louder. Mixers are audio components that can improve the quality of sound by enhancing sound waves. These devices can make music more fun and exciting.

Connect your audio equipment to your mixer to improve the quality of your audio. Connect the correct output cables to the right outputs on the mixer for best results.


I enjoyed connecting the speakers to the mixer. As you can see from this article, it is straightforward to connect speakers. All you need to do is follow the simple steps mentioned here, and you’ll be done in no time.

I hope this post answered your question about How to Connect Powered Speakers to a Mixer. If you have any questions, leave a comment in the comments section below and I will respond within three business days.

Affiliate Disclosure: I may earn a commission for my endorsement, recommendation, testimonial, and/or link to any products or services from the links above. Your purchase helps support my work in bringing you real information about my experience, and does not cost anything additional to you.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.